Call Today 1-904-ALPHA95 (257 4295)  |   FL EF 20001191  |   Convenience and Protection without the Hassle

         CUSTOMER LOGIN

Origin Acoustics Home Theater Speakers

In-Ceiling Speakers

Director D109
1800.00
Director 10" Series - Fully Pivoting 3-Way In-Ceiling Loudspeaker with a 10" Kevlar Woofer, Exclusive DPSD Tweeter Technology and Tool-Less Installation.
SKU:SCD100900
Read More
Features More Bass For Your Space The amount of air a driver can move is a function of its surface area and the length of its throw or excursion. Driving the lower frequencies in the Director D109 is a massive 10-inch woofer, which has 60% more surface area than its 8-inch counterpart. However, our engineers have been able to fit this driver into an assembly the size of our competitors 8-inch models. The result is a much smaller footprint with incredible bass. The woofer cone is made of injection-molded graphite which offers low mass while consistently holding the drivers shape. Tri-Linear Configuration (TLC) The Director 10 Better features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of injection-molded graphite and the tweeter is produced from formed aluminum. Director Technology The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D109 features an assembly that can be adjusted to focus the sound from both the woofer and tweeter toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot." Dual Plane Stabilized Diaphragm (DPSD™) A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D107
1475.00
Director 10" Series - Fully Pivoting 3-Way In-Ceiling Loudspeaker with a 10" Glass Fiber Woofer, Exclusive DSPD Tweeter Technology and Tool-Less Installation
SKU:SCD100700
Read More
Features More Bass For Your Space The amount of air a driver can move is a function of its surface area and the length of its throw or excursion. Driving the lower frequencies in the Director D107 is a massive 10-inch woofer, which has 60% more surface area than its 8-inch counterpart. However, our engineers have been able to fit this driver into an assembly the size of our competitors 8-inch models. The result is a much smaller footprint with incredible bass. The woofer cone is made of injection-molded graphite which offers low mass while consistently holding the drivers shape. Tri-Linear Configuration (TLC) The Director 107 features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of injection-molded graphite and the tweeter is produced from formed aluminum. Director Technology The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D107 features an assembly that can be adjusted to focus the sound from both the woofer and tweeter toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot." Dual Plane Stabilized Diaphragm (DPSD™) A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D105
1150.00
Director 10" Series - Fully Pivoting 3-Way In-Ceiling Loudspeaker with a 10" IMG Woofer, Exclusive DSPD tweeter Technology and Tool-Less Installation
SKU:SCD100500
Read More
Features More Bass For Your Space The amount of air a driver can move is a function of its surface area and the length of its throw or excursion. Driving the lower frequencies in the Director D107 is a massive 10-inch woofer, which has 60% more surface area than its 8-inch counterpart. However, our engineers have been able to fit this driver into an assembly the size of our competitors 8-inch models. The result is a much smaller footprint with incredible bass. The woofer cone is made of injection-molded graphite which offers low mass while consistently holding the drivers shape. Tri-Linear Configuration (TLC) The Director 107 features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of injection-molded graphite and the tweeter is produced from formed aluminum. Director Technology The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D107 features an assembly that can be adjusted to focus the sound from both the woofer and tweeter toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot." Dual Plane Stabilized Diaphragm (DPSD™) A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D89
1400.00
Director 8" Series - Fully Pivoting 3-Way In-Ceiling Loudspeaker with an 8" Kevlar Woofer, Exclusive DPSD tweeter Technology and Tool-less Installation.
SKU:SCD89000
Read More
Features Tool-Less Installation Interchangeable, secure, elegant. This is the way in-ceiling loudspeakers are meant to be installed. The Director Collection utilizes our tool-less mounting system to provide secure installation in any ceiling. You won’t need any tools once the hole is cut, just secure the ring and insert the loudspeaker. The spring-loaded clips and multiple points of contact ensure the weight is distributed more evenly than traditional dog-legs which eliminates warping of the baffle or drywall. More Bass. Less Space. A 6-inch loudspeaker simply cannot create the low end of an 8-inch. But most 8-inch loudspeakers require huge cut-outs. Your clients do not want to compromise aesthetics or quality. The Director Collection addresses just that. All Origin Acoustics 6-inch & 8-inch Director Collection Loudspeakers fit into the same cut-out size. By installing a long-throw, 8-inch woofer loudspeaker without needing additional space in the ceiling, you are able to offer your customer more bass, in less space. Tri-Linear Configuration (TLC) Simply put, the TLC is Origin Acoustics’ 3-way in-ceiling loudspeaker design. With an elegant stacked system of transducers, we’ve increased the pivot of the loudspeaker so you can improve imaging for your clients. Dual Plane Stabilized Diaphragm (DPSD™) A patented tweeter design that improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that prevents distortion and increases loudness. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround When a speaker cone reaches its limit of movement and comes to a hard stop, unwanted waves ripple up and down the cone. This is much like a wave hitting the edge of a pool and reflecting back in the center of the water. Our X-Wave Woofer Surround progressively absorbs that impact, prevented unwanted sonic distortion and improving the overall fidelity of the loudspeaker. Compression Molded Woofer Baskets Using time tested and true technique of compression molding, we are able to design and produce woofer baskets that are both highly stable and acoustically neutral. The end result is a reduction in distortion without coloration from the basket itself. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Weather Proof With an IPX6 rating, the entire Director Collection is ready for installation into a wet environment, just add an EX Grille. This rating ensures that your loudspeakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms. We believe in these so much, they’re back by a lifetime warranty.
Director D87
800.00
Director 8" Series - Fully Pivoting 3-Way In-Ceiling Loudspeaker with an 8" Glass Fiber Woofer, Exclusive DSPD tweeter Technology and Tool-less Installation.
SKU:SCD80700
Read More
Features Tool-Less Installation Interchangeable, secure, elegant. This is the way in-ceiling loudspeakers are meant to be installed. The Director Collection utilizes our tool-less mounting system to provide secure installation in any ceiling. You won’t need any tools once the hole is cut, just secure the ring and insert the loudspeaker. The spring-loaded clips and multiple points of contact ensure the weight is distributed more evenly than traditional dog-legs which eliminates warping of the baffle or drywall. More Bass. Less Space. A 6-inch loudspeaker simply cannot create the low end of an 8-inch. But most 8-inch loudspeakers require huge cut-outs. Your clients do not want to compromise aesthetics or quality. The Director Collection addresses just that. All Origin Acoustics 6-inch & 8-inch Director Collection Loudspeakers fit into the same cut-out size. By installing a long-throw, 8-inch woofer loudspeaker without needing additional space in the ceiling, you are able to offer your customer more bass, in less space. Tri-Linear Configuration (TLC) Simply put, the TLC is Origin Acoustics’ 3-way in-ceiling loudspeaker design. With an elegant stacked system of transducers, we’ve increased the pivot of the loudspeaker so you can improve imaging for your clients. Dual Plane Stabilized Diaphragm (DPSD™) A patented tweeter design that improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that prevents distortion and increases loudness. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround When a speaker cone reaches its limit of movement and comes to a hard stop, unwanted waves ripple up and down the cone. This is much like a wave hitting the edge of a pool and reflecting back in the center of the water. Our X-Wave Woofer Surround progressively absorbs that impact, prevented unwanted sonic distortion and improving the overall fidelity of the loudspeaker. Compression Molded Woofer Baskets Using time tested and true technique of compression molding, we are able to design and produce woofer baskets that are both highly stable and acoustically neutral. The end result is a reduction in distortion without coloration from the basket itself. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Weather Proof With an IPX6 rating, the entire Director Collection is ready for installation into a wet environment, just add an EX Grille. This rating ensures that your loudspeakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms. We believe in these so much, they’re back by a lifetime warranty.
Director D85
545.00
Director 8" Series - Fully Pivoting 3-Way In-Ceiling Loudspeaker with a 8" IMG Woofer, Exclusive DSPD tweeter Technology and Tool-Less Installation
SKU:SCD80500
Read More
Features More Bass For Your Space The amount of air a driver can move is a function of its surface area and the length of its throw or excursion. Driving the lower frequencies in the Director D107 is a massive 10-inch woofer, which has 60% more surface area than its 8-inch counterpart. However, our engineers have been able to fit this driver into an assembly the size of our competitors 8-inch models. The result is a much smaller footprint with incredible bass. The woofer cone is made of injection-molded graphite which offers low mass while consistently holding the drivers shape. Tri-Linear Configuration (TLC) The Director 107 features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of injection-molded graphite and the tweeter is produced from formed aluminum. Director Technology The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D107 features an assembly that can be adjusted to focus the sound from both the woofer and tweeter toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot." Dual Plane Stabilized Diaphragm (DPSD™) A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D83
385.00
Director 8" Series - In-Ceiling Loudspeaker with an 8" IMG Woofer, Pivoting Aluminum Dome Tweeter and Tool-less Installation.
SKU:SCD803000
Read More
Features Director Technology The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D83 features an assembly that can be adjusted to focus the sound from both the woofer and tweeter toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot." Hand Selected Drivers Choosing the right drivers is part of the blend of art and technology that creates Origin Acoustics‘ signature sound. The woofer cone in the D83 is made of Poly Rubber which offers low mass and durability. The silk dome tweeter pivots allowing the installer to direct the critical high frequencies toward the listening area. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D83DT/SUR
650.00
Director 8" Series - Stereo In-Ceiling Loudspeaker with an 8" IMG Woofer, Dual Aluminum Tweeters and Tool-less Installation.
SKU:SCDT83000
Read More
Features Tool-Less Installation Interchangeable, secure, elegant. This is the way in-ceiling loudspeakers are meant to be installed. The Director Collection utilizes our tool-less mounting system to provide secure installation in any ceiling. You won’t need any tools once the hole is cut, just secure the ring and insert the loudspeaker. The spring-loaded clips and multiple points of contact ensure the weight is distributed more evenly than traditional dog-legs which eliminates warping of the baffle or drywall. More Bass. Less Space. A 6-inch loudspeaker simply cannot create the low end of an 8-inch. But most 8-inch loudspeakers require huge cut-outs. Your clients do not want to compromise aesthetics or quality. The Director Collection addresses just that. All Origin Acoustics 6-inch & 8-inch Director Collection Loudspeakers fit into the same cut-out size. By installing a long-throw, 8-inch woofer loudspeaker without needing additional space in the ceiling, you are able to offer your customer more bass, in less space. Tri-Linear Configuration (TLC) Simply put, the TLC is Origin Acoustics’ 3-way in-ceiling loudspeaker design. With an elegant stacked system of transducers, we’ve increased the pivot of the loudspeaker so you can improve imaging for your clients. Dual Plane Stabilized Diaphragm (DPSD™) A patented tweeter design that improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that prevents distortion and increases loudness. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround When a speaker cone reaches its limit of movement and comes to a hard stop, unwanted waves ripple up and down the cone. This is much like a wave hitting the edge of a pool and reflecting back in the center of the water. Our X-Wave Woofer Surround progressively absorbs that impact, prevented unwanted sonic distortion and improving the overall fidelity of the loudspeaker. Compression Molded Woofer Baskets Using time tested and true technique of compression molding, we are able to design and produce woofer baskets that are both highly stable and acoustically neutral. The end result is a reduction in distortion without coloration from the basket itself. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Weather Proof With an IPX6 rating, the entire Director Collection is ready for installation into a wet environment, just add an EX Grille. This rating ensures that your loudspeakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms. We believe in these so much, they’re back by a lifetime warranty.
Director D81-6
265.95
Director 8" Series - In-Ceiling Loudspeaker with an 8" Poly-Rubber Woofer, Pivoting Silk Dome Tweeter and Tool-less Installation.
SKU:SCD80100-6
Read More
Features Hand Selected Drivers Choosing the right drivers is part of the blend of art and technology that creates Origin Acoustics‘ signature sound. The woofer cone in the D61 is made of Poly Rubber which offers low mass and durability. The silk dome tweeter pivots allowing the installer to direct the critical high frequencies toward the listening area. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D69
690.00
Director 6" Series - Fully Pivoting 2-Way In-Ceiling Loudspeaker with a 6.5" Kevlar Woofer, Exclusive DSPD tweeter Technology and Tool-less Installation.
SKU:SCD69000
Read More
Features Tool-Less Installation Interchangeable, secure, elegant. This is the way in-ceiling loudspeakers are meant to be installed. The Director Collection utilizes our tool-less mounting system to provide secure installation in any ceiling. You won’t need any tools once the hole is cut, just secure the ring and insert the loudspeaker. The spring-loaded clips and multiple points of contact ensure the weight is distributed more evenly than traditional dog-legs which eliminates warping of the baffle or drywall. More Bass. Less Space. A 6-inch loudspeaker simply cannot create the low end of an 8-inch. But most 8-inch loudspeakers require huge cut-outs. Your clients do not want to compromise aesthetics or quality. The Director Collection addresses just that. All Origin Acoustics 6-inch & 8-inch Director Collection Loudspeakers fit into the same cut-out size. By installing a long-throw, 8-inch woofer loudspeaker without needing additional space in the ceiling, you are able to offer your customer more bass, in less space. Tri-Linear Configuration (TLC) Simply put, the TLC is Origin Acoustics’ 3-way in-ceiling loudspeaker design. With an elegant stacked system of transducers, we’ve increased the pivot of the loudspeaker so you can improve imaging for your clients. Dual Plane Stabilized Diaphragm (DPSD™) A patented tweeter design that improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that prevents distortion and increases loudness. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround When a speaker cone reaches its limit of movement and comes to a hard stop, unwanted waves ripple up and down the cone. This is much like a wave hitting the edge of a pool and reflecting back in the center of the water. Our X-Wave Woofer Surround progressively absorbs that impact, prevented unwanted sonic distortion and improving the overall fidelity of the loudspeaker. Compression Molded Woofer Baskets Using time tested and true technique of compression molding, we are able to design and produce woofer baskets that are both highly stable and acoustically neutral. The end result is a reduction in distortion without coloration from the basket itself. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Weather Proof With an IPX6 rating, the entire Director Collection is ready for installation into a wet environment, just add an EX Grille. This rating ensures that your loudspeakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms. We believe in these so much, they’re back by a lifetime warranty.
Director D67
415.00
Director 6" Series - Fully Pivoting 2-Way In-Ceiling Loudspeaker with a 6.5" Glass Fiber Woofer, Exclusive DSPD tweeter Technology and Tool-less Installation.
SKU:SCD60700
Read More
Features Tool-Less Installation Interchangeable, secure, elegant. This is the way in-ceiling loudspeakers are meant to be installed. The Director Collection utilizes our tool-less mounting system to provide secure installation in any ceiling. You won’t need any tools once the hole is cut, just secure the ring and insert the loudspeaker. The spring-loaded clips and multiple points of contact ensure the weight is distributed more evenly than traditional dog-legs which eliminates warping of the baffle or drywall. More Bass. Less Space. A 6-inch loudspeaker simply cannot create the low end of an 8-inch. But most 8-inch loudspeakers require huge cut-outs. Your clients do not want to compromise aesthetics or quality. The Director Collection addresses just that. All Origin Acoustics 6-inch & 8-inch Director Collection Loudspeakers fit into the same cut-out size. By installing a long-throw, 8-inch woofer loudspeaker without needing additional space in the ceiling, you are able to offer your customer more bass, in less space. Tri-Linear Configuration (TLC) Simply put, the TLC is Origin Acoustics’ 3-way in-ceiling loudspeaker design. With an elegant stacked system of transducers, we’ve increased the pivot of the loudspeaker so you can improve imaging for your clients. Dual Plane Stabilized Diaphragm (DPSD™) A patented tweeter design that improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that prevents distortion and increases loudness. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround When a speaker cone reaches its limit of movement and comes to a hard stop, unwanted waves ripple up and down the cone. This is much like a wave hitting the edge of a pool and reflecting back in the center of the water. Our X-Wave Woofer Surround progressively absorbs that impact, prevented unwanted sonic distortion and improving the overall fidelity of the loudspeaker. Compression Molded Woofer Baskets Using time tested and true technique of compression molding, we are able to design and produce woofer baskets that are both highly stable and acoustically neutral. The end result is a reduction in distortion without coloration from the basket itself. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Weather Proof With an IPX6 rating, the entire Director Collection is ready for installation into a wet environment, just add an EX Grille. This rating ensures that your loudspeakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms. We believe in these so much, they’re back by a lifetime warranty.
Director D65
330.00
Director 6" Series - Fully Pivoting 2-Way In-Ceiling Loudspeaker with a 6.5" IMG Woofer, Exclusive DSPD tweeter Technology and Tool-less Installation.
SKU:SCD60500
Read More
Features More Bass For Your Space The amount of air a driver can move is a function of its surface area and the length of its throw or excursion. Driving the lower frequencies in the Director D107 is a massive 10-inch woofer, which has 60% more surface area than its 8-inch counterpart. However, our engineers have been able to fit this driver into an assembly the size of our competitors 8-inch models. The result is a much smaller footprint with incredible bass. The woofer cone is made of injection-molded graphite which offers low mass while consistently holding the drivers shape. Tri-Linear Configuration (TLC) The Director 107 features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of injection-molded graphite and the tweeter is produced from formed aluminum. Director Technology The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D107 features an assembly that can be adjusted to focus the sound from both the woofer and tweeter toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot." Dual Plane Stabilized Diaphragm (DPSD™) A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D63
260.00
Director 6" Series - 2-Way In-Ceiling Loudspeaker with a 6.5" IMG Woofer, Pivoting Aluminum Tweeter and Tool-Less Installation.
SKU:SCD63000
Read More
Features Director Technology The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D83 features an assembly that can be adjusted to focus the sound from both the woofer and tweeter toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot." Hand Selected Drivers Choosing the right drivers is part of the blend of art and technology that creates Origin Acoustics‘ signature sound. The woofer cone in the D83 is made of Poly Rubber which offers low mass and durability. The silk dome tweeter pivots allowing the installer to direct the critical high frequencies toward the listening area. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Director D61DT
330.00
Director 6" Series - 2-Way In-Ceiling Loudspeaker with a 6.5" Poly-Rubber Woofer, Dual silk dome tweeters and Tool-Less Installation.
SKU:SCD2T60100
Read More
Features Tool-Less Installation Interchangeable, secure, elegant. This is the way in-ceiling loudspeakers are meant to be installed. The Director Collection utilizes our tool-less mounting system to provide secure installation in any ceiling. You won’t need any tools once the hole is cut, just secure the ring and insert the loudspeaker. The spring-loaded clips and multiple points of contact ensure the weight is distributed more evenly than traditional dog-legs which eliminates warping of the baffle or drywall. More Bass. Less Space. A 6-inch loudspeaker simply cannot create the low end of an 8-inch. But most 8-inch loudspeakers require huge cut-outs. Your clients do not want to compromise aesthetics or quality. The Director Collection addresses just that. All Origin Acoustics 6-inch & 8-inch Director Collection Loudspeakers fit into the same cut-out size. By installing a long-throw, 8-inch woofer loudspeaker without needing additional space in the ceiling, you are able to offer your customer more bass, in less space. Tri-Linear Configuration (TLC) Simply put, the TLC is Origin Acoustics’ 3-way in-ceiling loudspeaker design. With an elegant stacked system of transducers, we’ve increased the pivot of the loudspeaker so you can improve imaging for your clients. Dual Plane Stabilized Diaphragm (DPSD™) A patented tweeter design that improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that prevents distortion and increases loudness. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion. X-Wave Woofer Surround When a speaker cone reaches its limit of movement and comes to a hard stop, unwanted waves ripple up and down the cone. This is much like a wave hitting the edge of a pool and reflecting back in the center of the water. Our X-Wave Woofer Surround progressively absorbs that impact, prevented unwanted sonic distortion and improving the overall fidelity of the loudspeaker. Compression Molded Woofer Baskets Using time tested and true technique of compression molding, we are able to design and produce woofer baskets that are both highly stable and acoustically neutral. The end result is a reduction in distortion without coloration from the basket itself. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Weather Proof With an IPX6 rating, the entire Director Collection is ready for installation into a wet environment, just add an EX Grille. This rating ensures that your loudspeakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms. We believe in these so much, they’re back by a lifetime warranty.
Director D61-6
195.95
Director 6" Series - 2-Way In-Ceiling Loudspeaker with a 6.5" IMG Woofer, Pivoting Silk Tweeter and Tool-Less Installation.
SKU:SCD60100-6
Read More
Features Hand Selected Drivers Choosing the right drivers is part of the blend of art and technology that creates Origin Acoustics‘ signature sound. The woofer cone in the D61 is made of Poly Rubber which offers low mass and durability. The silk dome tweeter pivots allowing the installer to direct the critical high frequencies toward the listening area. X-Wave Woofer Surround While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround. Progressive Suspension As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range. Compression Molded Woofer Baskets Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance. Tool-Less Installation It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle. Magnetic Grille A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy. Let It Sink In With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance speakers are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.

Inwall Speakers

Composer In-Wall 60
175.00
Composer In-Wall Series - Rectangular In-Wall 2 Way Loudspeaker, Traditional Footprint, Pivoting Soft-Dome Tweeter, 6.5" Poly-Rubber Woofer (Carton of 8). Designed to be a sonic match to the Director 6" Series, the CIW60 is suitable for any installation that requires the clarity of a Director Speaker but ceiling access is not available.
SKU:CIW6000-8
Read More
Specifications Model Number CIW60-8 Part Number CIW6000-8 Tweeter Dome PEI Tweeter Diameter 1" (25mm) Woofer Cone Polypropylene Woofer Diameter 6.5" (165mm) Frequency Response 45Hz-20kHz Recommended Amplifier Power 25 watts - 110 watts Speaker Series Composer Mounting Depth 3" (76mm)

Subwoofers

SUBV8P Performance Subwoofer
499.95
8" Performance Subwoofer with Premium Line Grain Finish. The goal of our Performance Collection of subwoofers is to offer the absolute best bass reproduction at a competitive price point. These speakers deliver. More power, better drivers, and a more durable finish than other subs in their class.
SKU:SUBV8000P
Read More
Features Eight-Inch Performance Subwoofer Tuned-Up To move enough air to create the thumping bass we all deserve, we've added a passive radiator to our all-new SubVP series of subwoofers. This passive diaphragm reacts to the changing air pressure within the cabinet, virtually doubling your woofer's ability to create sound without drawing additional power. As a result, even smaller cabinets like these can create impactful low frequencies. Premium Finish Our brushed hybrid finish is durable and easy on the eyes. This thick, textured wrap looks and feels much more luxurious than the standard vinyl finishes you might see in other subwoofers at this price point. 5v Power Pair our Wireless Sub Kit with the convenient 5v USB power outlet located on the rear panel of this series of subwoofers to open up your placement options. Petite Cabinets We've managed to produce shake-you-to-your-core low-end out of surprisingly diminutive cabinets by hand-selecting premium drivers and coupling them with powerful digital amplifiers. The passive radiator then really drives the whole system home.
SUBV10P Performance Subwoofer
695.95
10" Performance Subwoofer with Premium Line Grain Finish. The goal of our Performance Collection of subwoofers is to offer the absolute best bass reproduction at a competitive price point. These speakers deliver. More power, better drivers, and a more durable finish than other subs in their class.
SKU:SUBV10000P
Read More
Features Eight-Inch Performance Subwoofer Tuned-Up To move enough air to create the thumping bass we all deserve, we've added a passive radiator to our all-new SubVP series of subwoofers. This passive diaphragm reacts to the changing air pressure within the cabinet, virtually doubling your woofer's ability to create sound without drawing additional power. As a result, even smaller cabinets like these can create impactful low frequencies. Premium Finish Our brushed hybrid finish is durable and easy on the eyes. This thick, textured wrap looks and feels much more luxurious than the standard vinyl finishes you might see in other subwoofers at this price point. 5v Power Pair our Wireless Sub Kit with the convenient 5v USB power outlet located on the rear panel of this series of subwoofers to open up your placement options. Petite Cabinets We've managed to produce shake-you-to-your-core low-end out of surprisingly diminutive cabinets by hand-selecting premium drivers and coupling them with powerful digital amplifiers. The passive radiator then really drives the whole system home.
SUBV12P Performance Subwoofer
895.95
2" Performance Subwoofer with Premium Line Grain Finish. The goal of our Performance Collection of subwoofers is to offer the absolute best bass reproduction at a competitive price point. These speakers deliver. More power, better drivers, and a more durable finish than other subs in their class.
SKU:SUBV12000P
Read More
Features Eight-Inch Performance Subwoofer Tuned-Up To move enough air to create the thumping bass we all deserve, we've added a passive radiator to our all-new SubVP series of subwoofers. This passive diaphragm reacts to the changing air pressure within the cabinet, virtually doubling your woofer's ability to create sound without drawing additional power. As a result, even smaller cabinets like these can create impactful low frequencies. Premium Finish Our brushed hybrid finish is durable and easy on the eyes. This thick, textured wrap looks and feels much more luxurious than the standard vinyl finishes you might see in other subwoofers at this price point. 5v Power Pair our Wireless Sub Kit with the convenient 5v USB power outlet located on the rear panel of this series of subwoofers to open up your placement options. Petite Cabinets We've managed to produce shake-you-to-your-core low-end out of surprisingly diminutive cabinets by hand-selecting premium drivers and coupling them with powerful digital amplifiers. The passive radiator then really drives the whole system home.
SUBD8EQ - 8" Deep Subwoofer
750.00
Deep Series - Subwoofer with 8" Aluminum Driver, 8" Resin-Paper Radiator. Mid-century Modern Design. Bluetooth EQ and Volume.
SKU:SUBD8000EQ
Read More
Features Midcentury Modern Design Inspired by one of the greatest periods of American industrial design, Deep Subwoofers are a subtle yet elegant addition to any sound system. Small enough to hide, but definitely ready to be shown off. Active & Passive Cones Each Deep Subwoofer contains a high quality downward-facing resin-paper radiator as well as a powerful front-firing aluminum radiator. This allows true to life sound by improving bass response and reducing unwanted frequencies. Massive Power Featuring state of the art BASH amplification, these subs seriously rock. Each model is pushed to the limit of its sonic capabilities but still resonate at lower volumes. So, whether you want to wake up your neighbors or enjoy a film on a Sunday afternoon, Deep Subwoofers are an amazing choice. Bluetooth EQ & Control Perfecting your bass response has never been so easy. With our free smart phone app you can connect to your subwoofer, adjust volume, EQ, and even phase.
SUBD10EQ - 10" Deep Subwoofer
1000.00
Deep Series - Subwoofer with 10" Aluminum Driver, 10" Resin-Paper Radiator. Mid-century Modern Design. Bluetooth EQ and Volume.
SKU:SUBD10000EQ
Read More
Features Midcentury Modern Design Inspired by one of the greatest periods of American industrial design, Deep Subwoofers are a subtle yet elegant addition to any sound system. Now you can enjoy deep tones and rich sonic environments without an unsightly black box dominating your space. Active & Passive Cones Each Deep Subwoofer contains a high quality downward-facing resin-paper radiator as well as a powerful front-firing aluminum radiator. This allows true to life sound by improving bass response and reducing unwanted frequencies. Massive Power Featuring state of the art BASH amplification, these subs seriously rock. Each model is pushed to the limit of its sonic capabilities but still resonate at lower volumes. So, whether you want to wake up your neighbors or enjoy a film on a Sunday afternoon, Deep Subwoofers are an amazing choice. Bluetooth EQ & Control Perfecting your bass response has never been so easy. With our free smart phone app you can connect to your subwoofer, adjust volume, EQ, and even phase.
SUBD12EQ - 12" Deep Subwoofer
1250.00
Deep Series - Subwoofer with 12" Aluminum Driver, 12" Resin-Paper Radiator. Mid-century Modern Design. Bluetooth EQ and Volume.
SKU:SUBD12000EQ
Read More
Features Midcentury Modern Design Inspired by one of the greatest periods of American industrial design, Deep Subwoofers are a subtle yet elegant addition to any sound system. Now you can enjoy deep tones and rich sonic environments without an unsightly black box dominating your space. Active & Passive Cones Each Deep Subwoofer contains a high quality downward-facing resin-paper radiator as well as a powerful front-firing aluminum radiator. This allows true to life sound by improving bass response and reducing unwanted frequencies. Massive Power Featuring state of the art BASH amplification, these subs seriously rock. Each model is pushed to the limit of its sonic capabilities but still resonate at lower volumes. So, whether you want to wake up your neighbors or enjoy a film on a Sunday afternoon, Deep Subwoofers are an amazing choice. Bluetooth EQ & Control Perfecting your bass response has never been so easy. With our free smart phone app you can connect to your subwoofer, adjust volume, EQ, and even phase.
SUBDD12EQ - Dual 12" Deep Subwoofer
1250.00
Deep Series - Subwoofer with Dual 12" Aluminum Drivers. Mid-Century Modern Design. Bluetooth EQ and Volume.
SKU:SUBDD1200EQ
Read More
Features Inspired by one of the greatest periods of American industrial design, Deep Subwoofers are a subtle yet elegant addition to any sound system. Now you can enjoy deep tones and rich sonic environments without an unsightly black box dominating your space. These Deep Subwoofers contain dual 12" woofers. Featuring state of the art BASH amplification, these subs seriously rock. Each model is pushed to the limit of its sonic capabilities, but still resonate at lower volumes. So, whether you want to wake up your neighbors or enjoy a film on a Sunday afternoon, Deep Subwoofers are an amazing choice.
Marquee 15" Subwoofer
2250.00
Marquee Collection - Passive 15" Subwoofer for home theater application. Requires SubA500 Amplifier.
SKU:M1500SUB
Read More
Specifications Model Number M1500SUB Part Number M1500SUB Woofer Cone Custom Resin Coated Paper Speaker Series Marquee
In-Ceiling Dual 8" Subwoofer
1500.00
Director Dual 8" In-Ceiling Subwoofer including 6" Bandpass Port Tube, Tool-Less Installation with port adaptor, BR68 New-Construction Bracket, and round bezel-less magnetic grille (Matches Director 6" & 8" Speakers)
SKU:DSUB8F80K
Read More
Wider Bandpass Port-Tube Our Director In-Ceiling Subwoofers contain dual poly/rubber woofers, mounted in a sturdy MDF box. The frequencies they create are then filtered by the port and port-tube into the room through a matching Director Grille. This method ensures that only pure, deep bass tones are passed into the room. The DSUB8 features a wider port-tube, which allows even lower, more powerful frequencies to resonate. Larger Woofers The Director DSUB8 contains two heavy-duty poly/rubber subwoofer cones, internally mounted. These two woofers contain more than 3x the surface area of our DUB6's, which means they move more air, more efficiently. The result, the type of low-end volume and frequencies that a 12" floor-standing subwoofer would typically create. Hide It. Our Director Subwoofers are designed to be fully functional, self-contained passive subwoofers. They install securely to ceiling joists, but can also be used in cabinets, trucks, or pretty much anywhere else you can think of. The bandpass port-tube and sturdy construction reduce noise transfer, so the only thing left rattling at high-volume will be your ribcage.

Amplifiers

SubA150
700.00
Foundation Series - Subwoofer Amplifier with 150w of Class D Power in a 1U Design.
SKU:AMPSUB1X150
Read More
Model Number SubA150 Part Number AMPSUB1X150 Speaker Series Foundation Speaker Size 1U Dimensions 2”H X 17”W X 11 3/4”D (51mm x 432mm x 299mm) Number of Channels 1 Power Output (all channels) 4Ω 150 Total Harmonic Distortion At 1W output 0.06% Harmonic Distortion At Rated output 0.90% S/N Ratio at Rated output 104dB Input Sensitivity 165mV Auto on Sensitivity 3.4mV Turn on Delay 3 seconds Time for Auto off 12 minutes Stand-by Power Consumption .32 Watts Low-Pass Filter Frequency 50HZ - 160HZ Low-Pass Filter Slope 12dB/Oct. Phase control switch 0 and 180
SubA500
1375.00
Foundation Series - Subwoofer Amplifier with 500w of Class D Power in a 1U Design. Perfect for driving any of the Landscape Series in-ground subwoofers, the SubA500 delivers 500 watts of dependable Class-D power with incredible adjustment flexibility. Featuring a variable low-pass crossover and digital EQ, this amplifier is designed to make the Landscape Subwoofers shake the ground.
SKU:AMPSUB1X500
Read More
Model Number SubA500 Part Number AMPSUB1X500 Speaker Series Foundation Dimensions 1 3/4"H x 17"W x 10 2/5"D (45mm x 435mm x 264mm)
Amplifier A1250
1350.00
Foundation Series - 12-Channel Amplifier with 150w of Class D Power in a 2U Design.
SKU:AMP12X5000
Read More
Tech Details A1250 - Twelve Channel, Stereo Amplifier At 50 watts of power to each channel and 100 watts to one channel in bridged mode and the ability to consistently drive a 4-ohm load, this is a workhorse that can be used as a building block in any system. Its automation and protection circuits serve to make it perfect choice for home theater or multi-room/multi-zone applications. Class-D Power This switching type amplifier class has incredible efficiency, above 90%, as higher power is demanded. This means substantially less heat is produced even though the amplifier is able to produce substantial power. This also means a reduction in size as smaller heat sinks are required and the electronic circuitry can be more compact and reside in a smaller chassis. Bridgeable Circuit Bridging two channels into one drives almost triple the power into a single output. This feature creates greater flexibility in system design when additional power is a requirement. Automation Origin amplifiers can be place in a rack or inside furniture and require no direct access to function. They are turned on out of standby mode either by sensing the audio signal from a preamp or receiver or by a 12-volt signal from any number of components. They also have a 12-volt output to trigger other components as necessary. Protection Built-in circuits that sense both thermal overload or a short-circuit in the speaker connections, will shut down the amplifier until the temperature level returns to normal operating levels or the short in the connections is corrected. This protects the amplifier from permanent damage and avoids costly service visits and repairs.
DSP3-100
1200.00
DSP Series - 8-Ohm 3-Channel Amplifier with 2 channels of 150w Power and 1 with 300w, 2U Design and Origin Environment Correction DSP. DSP3 amplifiers are highly flexible and intelligent digital audio 3 Channels Class D power amplifiers. The DSP3-100 amplifier delivers up to a total of 650W@4Ω. All setup parameters for input/output processes and DSP features are accessible by using the remote PC so ware. Each DSP3-100 comes preloaded with up to 16 DSP presets to optimize it for use with all of Origin Acoustics’ speakers and subwoofers assuring peak performance. We have simplified set-up by limiting front panel adjustments to that of loading internal presets and setting channel levels. All other DSP adjustments require the use of the dedicated so ware program.
SKU:AMPSUB1X150
Read More
Specifications Model Number DSP3-100 Part Number AMPD03X1000 Speaker Series DSP Amplifier Dimensions 17 x 3.5 x 14" (433 x 88 x333mm) Number of Channels 3 Power Output (all channels) 4Ω 650w
DSP3-700 Amplifier
1375.00
DSP Series - 70V / 8-Ohm 3-Channel Amplifier with 700w of Class D Power Per Channel, 2U Design and Origin Environment Correction DSP. Flexible Options Designing a system with the DSP3-700 is a breeze. With a selection of DSP presets preloaded to match every outdoor speaker in our arsenal, the set-up is as easy as selecting the one that’s right for your design configuration. Or, with a total of 64 presets, you can customize and store settings for each specific project should you choose. Independent settings can be assigned to each of the three channels, which can then be used to sum or play either the left and right inputs.
SKU:AMPD03X7000
Read More
Specifications Model Number DSP3-700 Part Number AMPD03X7000 Speaker Series DSP Amplifier Number of Channels 3 Power Output (all channels) 4Ω 700 Power Output (all channels) 8Ω @ 1000 500